Oak Kashmir Grey
  • 01
  • 02

Prices start at £85.10/ m² + Vat

Oak Kashmir Grey

A lightly fumed oak with a hint of grey, very similar in tone to Fumed Oak White but with more pronounced rustic characteristics.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.



See below an extract of technical specifications for Oak Kashmir Grey. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

  • Origin

    Europe (Germany)

  • Shade

    Light / Medium / Brown tones / Grey tones
  • Sizes & Patterns

    Boards / Herringbone / Chevron

    Width: 195mm, 245mm
    Lengths: 2.2m and 2.4m


    120mm x 780mm


    120mm x 780mm

    Chevron angle: 55 degrees

  • Thickness

    11mm, 15mm, 20mm

  • Wear Layer

    +/- 4mm on all oak floors in 11mm, 15mm and 20mm depth
    The veneers are cut so the grain/figure is in the centre of the board

  • Grades

    Classic / Prime

    Classic grade allows a more pronounced variation in colour and grain. The floor contains frequent knots including filled knots. This grade may contain the following:

    • Knots up to 40 mm
    • Filling in a sympathetic style
    • Natural colour variation

    Prime grade has an even appearance with very few small knots. The natural variation is limited, though can be more visible on fumed oak. This grade may contain the following:

    • Knots up to 10 mm
    • Natural colour variation

    Note the grading rules for extra wide boards are less stringent, meaning that 280mm and 310mm wide boards in prime grade can contain knots up to 20mm in diameter.

  • Bevelled Edge

    Micro bevel (0.5mm)/ without bevel (square edge)

  • Texture


    Surface planing rather than sanding gives the floor a unique aged appearance.

  • Construction

    3-layer construction: The softwood core is produced from spruce with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers. The bottom layer is produced from spruce

  • UFH


  • Stair Noses

    V / P / S

    Nose V (Victorian Bullnose, solid)

    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose P (Square Nose, solid)

    Profile: Pencil round
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


Your sample bag is empty


Compare chart is empty