Larch Lyed White
  • 01
  • 02
  • 03

We are happy to advise you throughout the installation process to ensure the floor is fitted correctly.

Larch Lyed White

Our Siberian larch has a tight grain and is tougher than the European larch. Treated with lye oil, it’s an attractive silver-white colour which will age to a silver-grey tone over the years.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.

    Compare

Specifications

See below an extract of technical specifications for Larch Lyed White. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

    Larch
  • Origin

    Europe (Germany)

  • Shade

    Light / White tones
  • Sizes & Patterns

    Boards
    Boards

    Width: 185mm
    Lengths: 2.48m

  • Thickness

    15mm

  • Wear Layer

    +/- 4mm
    The veneers are cut so the grain/figure is in the centre of the board

  • Grades

    Knotty
    Knotty

    Our Siberian larch is a comparatively small tree with lots of branches, resulting in a knotty grade. The knots are mostly sound and vary in sizes up to 25mm. Note our standard grading rules for oak don’t apply for this species. 
     

  • Bevelled Edge

    Micro bevel (0.5mm)

  • Texture

    Brushed
    Brushed

    Wire brushing removes the soft parts of the grain and gives the floor a subtle textured feel.

  • Construction

    3-layer construction: The softwood core is produced from spruce with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers. The bottom layer is produced from spruce.

  • UFH

    Yes

  • Stair Noses

    V / S
    V

    Nose V (Victorian Bullnose, solid)

    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm

    S

    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm

Samples

Your sample bag is empty

Compare

Compare chart is empty