Fumed Oak Natural
Herrinbone Fumed Oak Natural
  • 01
  • 02
  • 03

We are happy to advise you throughout the installation process to ensure the floor is fitted correctly.

Fumed Oak Natural

The oak boards are lightly fumed to achieve a richer variation of tones from light-brown to medium-brown, and slightly lighter than the natural golden colour of the wood.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.



See below an extract of technical specifications for Fumed Oak Natural. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

  • Origin

    Europe (Holland)

  • Shade

    Light / Medium / Brown tones
  • Sizes & Patterns

    Boards / Herringbone / Chevron / Versailles panels

    Width: 145, 185, 225, 245, 285, 300 (mm)
    Lengths: Boards up to 245mm wide in standard length of 1.5m-2.5m / Boards in 285mm and 300mm width are produced in 2.5m-4.0m


    65 x 325, 85 x 425, 105 x 525, 145 x 580, 145 x 725, 185 x 925, 245 x 925 (mm)


    65 x 325, 85 x 425, 105 x 525, 145 x 580, 145 x 725, 185 x 925, 245 x 925 (mm)

    Chevron angle: 45 degrees or 60 degrees

    Versailles panels

    810 x 810, 1000 x 1000 (mm)

  • Thickness

    15mm (up to 285mm width), 20mm

  • Wear Layer

    +/- 4mm on 15mm thick floors
    +/- 6mm on 20mm thick floors

  • Grades

    Rustic / Rustic A / Premier

    Large and frequent knots including large filled knots become a feature of the overall look. Rustic grade allows for a wide range of variation in colour and grain. This grade may contain:

    • Knots up to 80 mm
    • Cracks up to 400 mm
    • Sapwood up to 25 mm
    • End cracks up to 150 mm
    • Centre core
    • Natural colour variation
    Rustic A

    Rustic A grade allows a more pronounced variation in colour and grain. The floor contains knots including filled knots. This grade may contain the following:

    • Knots up to 40 mm
    • Cracks up to 20 mm
    • Filling in a sympathetic style
    • Natural colour variation
    • Sapwood up to 10 mm

    Premier grade has an even appearance with possibly only occasional small knots and blemishes. The natural variation is limited, though can be more visible on fumed oak. This grade may contain the following:

    • Knots up to 15 mm
    • Small cracks up to 20 mm
    • Natural colour variation

    Boards wider than 245mm are only available in a rustic grade. On request we can select 285mm wide boards to a ‘good rustic grade’

  • Bevelled Edge

    Boards can be produced either without bevel (square edge), micro bevel (1.5mm) or with a hand-cut bevel

  • Texture

    Treehouse (Band sawn) / Planed / Brushed / Sawn & Scraped / Distressed
    Treehouse (Band sawn)

    Our sawn oak floors give a room a tranquil look with a vintage twist. Our floors can be produced with a lightly sawn texture or with more pronounced saw marks (our standard Treehouse finish).


    Surface planing rather than sanding gives the floor a unique aged appearance.


    Wire brushing removes the soft parts of the grain and gives the floor a subtle textured feel.

    Sawn & Scraped

    Rough marks from the scraping combined with random saw lines produce an authentic and worn-in surface that is superior to a reclaimed floor.


    The edges are lightly knocked, and the surface of the floor contains subtle indentations. Note our floors are not ‘tumbled’, so the finished floor will be free of splinters.

  • Construction


  • UFH


  • Stair Noses

    D / V / P / S

    Nose D (Dutch Bullnose, solid)

    Length: 1000 mm, 1500 mm, 2000 mm
    Depth: 15 mm or 20 mm


    Nose V (Victorian Bullnose, solid)

    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose P (Square Nose, solid)

    Profile: Pencil round
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


Your sample bag is empty


Compare chart is empty