Fumed Oak Light White

Prices start at £90.10/ m² + Vat

Fumed Oak Light White

The wood’s natural beauty and warmth is enhanced by the fuming process and a subtle white oil finish.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.



See below an extract of technical specifications for Fumed Oak Light White. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

  • Origin

    Europe (Germany)

  • Shade

    Light / Brown tones
  • Sizes & Patterns

    Boards / Herringbone / Chevron

    Width: 160, 195, 245, 260, 300 (mm)
    Lengths: Boards up to 245mm wide in standard length of 2.0m, 2.2m and 2.4m/ Boards in 260mm and 300mm width are produced in 3.65m and 4.2m lengths (subject to availability of raw materials)


    11 x 120 x 715mm


    11 x 120 x 715mm

    Chevron angle: 55 degrees

  • Thickness

    11mm (up to 195mm width), 15mm (up to 245mm width), 17mm (260mm and 300mm wide boards)

  • Wear Layer

    +/- 4mm on all oak floors in 11mm, 15mm and 17mm depth
    The veneers are cut so the grain/figure is in the centre of the board

  • Grades

    Rustic / Classic / Prime

    Large and frequent knots including large filled knots become a feature of the overall look. Rustic grade allows for a wide range of variation in colour and grain. This grade may contain:

    • Knots up to 80mm
    • Filled knots and other imperfections
    • Natural colour variation

    Classic grade allows a more pronounced variation in colour and grain. The floor contains frequent knots including filled knots. This grade may contain the following:

    • Knots up to 40 mm
    • Filling in a sympathetic style
    • Natural colour variation

    Prime grade has an even appearance with very few small knots. The natural variation is limited, though can be more visible on fumed oak. This grade may contain the following:

    • Knots up to 10 mm
    • Natural colour variation

    Note the grading rules for extra wide boards are less stringent, meaning that 280mm and 310mm wide boards in prime grade can contain knots up to 20mm in diameter.

    Rustic grade boards do not contain sapwood. Very wide boards (260mm and 300mm) are only available in classic and rustic grade.

  • Bevelled Edge

    Boards up to 245mm width are produced with a tiny micro bevel (0.5mm). Wider boards are produced with a V-bevel on the long side and a micro bevel on the board ends.

  • Texture


    Wire brushing removes the soft parts of the grain and gives the floor a subtle textured feel.

  • Construction

    3-layer construction: The softwood core is produced from spruce with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers. The bottom layer is produced from spruce.

  • UFH


  • Stair Noses

    V / P / S

    Nose V (Victorian Bullnose, solid)

    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose P (Square Nose, solid)

    Profile: Pencil round
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1000 mm, 1500 mm, 2000 mm, 2400 mm
    Depth: 15 mm or 20 mm


Your sample bag is empty


Compare chart is empty