Douglas Fir

Prices start at £146.00/ m² + Vat (300mm wide boards, classic grade, 2-5m long)

Superior engineered boards suitable for installation over underfloor heating

Douglas Fir

The honey tones of our Douglas Fir boards are finished with lye and white oil, giving them a clean and bright appearance and enhanced grain.

We can supply the recommended adhesive to ensure the floor performs at its best when installed over a heated substrate.

  1. Request a sample

    Click here to order your free sample. Please note there is a limit of three samples per request. If you require more samples please call or email us.

    Request Sample
  2. Compare this floor

    Click here to send this floor to a comparison chart to ensure it is available in your desired specification.

    Compare

Specifications

See below an extract of technical specifications for Douglas Fir. Please contact us anytime if you do have further questions or download the full technical sheet for more information.

  • Species

    Douglas Fir
  • Origin

    Europe (Germany)

  • Shade

    Light / White tones
  • Sizes & Patterns

    Boards
    Boards

    Width: 250, 300, 350, 400, 450 (mm)
    Lengths: 1.0/ 2.0m - 5.0m, very long boards up to 9.0m on request

  • Thickness

    21mm

  • Wear Layer

    +/- 6mm

  • Grades

    Classic
    Classic

    The veneers for our douglas fir are sourced in a high grade with small, primarily sound knots and grain figure typical for this softwood floor

    • Knots up to 40 mm
    • Uniform colour and grain

    Also available in standard rustic grade with frequent knots including large filled knots. Both classic grade and rustic grade boards contain sapwood typical to douglas fir.

  • Bevelled Edge

    Micro bevel (1.5mm)

  • Texture

    Sanded
  • Construction

    3-layer construction: The softwood core is produced with standing growth rings. The grain direction of the middle layer runs perpendicular to the top and bottom layers.

  • UFH

    Yes

  • Stair Noses

    S
    S

    Nose S (Square Nose, engineered)

    Profile: Micro bevel
    Length: 1.0m to 5.0m

    Depth: 21 mm

    We can produce a wide range of profiles from solid douglas fir. Just send us a sketch or drawing with the required specifiactions.

Samples

Your sample bag is empty

Compare

Compare chart is empty